If your remote control is not working the satellite receiver, however the light on the remote lights up when you press any button, you may have to simply press the sat button
towards the bottom part of the remote. If your remote has a mode button
in the upper middle, press that until the light lands on “sat”. You should now be able to work your satellite receiver.
If you press any button and the light on the remote does not light up or flickers faintly, then you should replace the batteries with new ones according to the battery diagram. If you have put new batteries in the remote and it still does not work, double check that they are all new and/or they are installed properly.
If the batteries in the remote are good but the remote still does not work, the remote could have built up an electrical charge. You will need to remove the batteries from the remote for approximately 30 seconds then replace them back into the remote. This should clear the electrical charge.
If your remote still doesn't work, contact the CroatianTV Australia technical support center by calling: +61.2.8006.1833
, press 3 for technical support or send them an e-mail to email@example.com